Paul's Travel Pictures

Ford Edge Vanity Mirror Light Bulb Replacement Guide
How to replace the vanity mirror light bulb in a 2007, 2008, 2009 or 2010 Ford Edge with picture illustrated instructions.

Main Menu            Home           Digital Cameras

Misc. Pictures            Articles            My Blog


By
Paul B. Michaels
Author & Photographer
Auto Mechanic Since 1989

 
Ford-Edge-Vanity-Mirror-Light-Bulb-Replacement-Guide-001
Vanity Mirror Light
Ford-Edge-Vanity-Mirror-Light-Bulb-Replacement-Guide-002
Pry Off Lens Cover
Ford-Edge-Vanity-Mirror-Light-Bulb-Replacement-Guide-003
Lens Cover Removed
This automotive "how-to" guide was specifically written to assist owners of the first generation (2007, 2008, 2009, 2010 and possibly also the updated 2011, 2012, 2013 & 2014) Ford Edge CUV in replacing a burnt out vanity mirror light bulb.

Owners of other Ford, Lincoln or Mercury vehicles such as the Taurus, Fiesta, Fusion, Focus, Mustang, Flex, Ranger, F-150, Escape, Explorer, Expedition, MKZ, MKX, MKS, MKT, Navigator, Milan, Mariner, Mountaineer, Grand Marquis & Town Car may also find this guide to be helpful.

A replacement miniature "fuse" style bulb for the driver or passenger vanity mirror light is part # 6614F (or TS-14V1CP), ACDelco 13502343 and Eiko 40842 - 6614F. They are available from Sylvania and other manufacturers.

The only tool needed to replace one of these bulbs is a small flathead screwdriver or a plastic pry bar tool.

A butter knife, coin or car key may also work if you don't have a screwdriver handy.



 
Ford-Edge-Vanity-Mirror-Light-Bulb-Replacement-Guide-004
Pry Out Light Bulb
Ford-Edge-Vanity-Mirror-Light-Bulb-Replacement-Guide-005
# 6614F Fuse Light Bulb
Ford-Edge-Vanity-Mirror-Light-Bulb-Replacement-Guide-006
Line Up Lens Cover
The first step is to gently pry off the translucent lens cover with the small flathead screwdriver.

Take care to not damage the retaining snaps on the rear of the lens cover.

Then pry out the old # 6614F light bulb with the screwdriver.

Push in a new bulb and test it by opening the vanity mirror.

Finally, line up the lens cover with the vanity mirror bulb housing and push it until it snaps in place.

Ford-Edge-Vanity-Mirror-Light-Bulb-Replacement-Guide-007
Snap Back In Place
Ford-Edge-Vanity-Mirror-Light-Bulb-Replacement-Guide-008
Test Light Bulb
Ford-Edge-Vanity-Mirror-Light-Bulb-Replacement-Guide-009
Check Lens Cover
For more of my related automotive how-to guides, click on the following links: Ford Edge Engine Oil Change Guide, Ford Edge Cabin Air Filter Guide, Ford Edge Front Brake Pads Replacement Guide, Ford Edge Rear Brake Pads Replacement Guide, Ford Edge Headlight Bulbs Replacement Guide, Ford Edge Tail Light Bulbs Replacement Guide, Ford Edge Door Speaker Replacement Guide, Ford Edge Power Window Motor Replacement Guide, Ford Edge Key Fob Battery Replacement Guide, Ford Edge Overhead Map Light Bulbs Replacement Guide, Ford Edge Rear Wiper Blade Replacement Guide, Ford Edge Rear Dome Light Bulbs Replacement Guide, Ford Edge Cargo Area Light Bulb Replacement Guide, Ford Edge Fog Light Bulb Replacement Guide and Ford Edge License Plate Light Bulbs Replacement Guide.

Check out all of my 2007-2010 Ford Edge DIY Repair & Maintenance Guides.
 

If you found this guide to be helpful, please consider making a small donation by clicking on the PayPal.com "Donate" button located to the right of this paragraph. Thank you!
(Note: I am not a registered charity. Donations are not tax deductible.)

Main Menu       Home       Digital Cameras

Misc. Pictures       Articles       My Blog

 

Copyright 2024 © PaulsTravelPictures.com
 All Rights Reserved ®

Paul's Travel Pictures is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com.

Privacy Policy     About Paul & Author Contact Info