Murano Key Fob Battery

After a few years of daily use, the battery inside the smart or "intelligent" key fob remote control for the keyless entry system of a second generation (2009, 2010, 2011, 2012, 2013 & 2014) Nissan Murano SUV can become weak or stop working entirely.

Check out my DIY tutorial for the battery change procedure (including the replacement part number) by clicking on the text link above or the thumbnail picture on the left.

Murano Map Light Bulbs

If you need to change a burnt out map light bulb in the overhead console of your second generation Nissan Murano or upgrade them both to brighter LED units, take a look at my DIY tutorial for the procedure (with the replacement part number) by clicking on the text link above or the thumbnail picture over on the left.

Murano Headlight Bulbs

The headlight assemblies of a second generation (2009, 2010, 2011, 2012, 2013 & 2014) Nissan Murano contain the low beam, high beam, front turn signal and front side marker light bulbs.

To view my DIY instructions for the procedure (including the replacement part numbers) by clicking on the text link above or the thumbnail image to the left.

Vanity Mirror Light Bulb

If you need to change a burnt out vanity mirror light bulb located in the sun visor of your 2nd generation Nissan Murano, check out my DIY tutorial for the procedure (with the replacement part number) by clicking on the text link above or the thumbnail picture to the left.

Rear Passenger Light

The second generation Nissan Murano is equipped with personal reading lights on the headliner by the row of rear passenger seats.

If you need to change either of these bulbs, or you'd like to upgrade them with brighter LED bulbs, check out my DIY instructions for the procedure (with the replacement part number) by clicking on the text link above or the thumbnail image to the left.

Interior Door Panels

If you'd like to upgrade the OEM door speakers in your second generation (2009, 2010, 2011, 2012, 2013 & 2014) Nissan Murano SUV, you'll first have to take off the plastic interior door panels.

Take a look at my DIY instructions for removing the door panels by clicking on the text link above or the thumbnail image to the left.

Cabin Air Filter Change

If the air conditioning system in your second generation Nissan Murano hasn't been working very well recently or the air coming out of the vents smells a bit musty, you probably need to clean or change the cabin air filter element in the HVAC blower motor housing.

To view my DIY tutorial for replacing the filter (including the replacement part numbers), click on the text link above or the thumbnail image to the left.

Rear Wiper Blade

If you've been having a difficult time seeing out of the back windshield window of your second generation Nissan Murano during a rain or snow storm, you probably need to change the rear wiper blade.

Check out my DIY instructions for the procedure, including the blade size in inches and replacement part numbers, by clicking on the text link above or the thumbnail image over on the left side of this paragraph.

Windshield Wiper Blades

If you've been having a hard time seeing out of the front windshield window of your Nissan Murano during a rain or snow storm, you probably need to change the wiper blades.

Take a look at my DIY instructions for the procedure (including the blade sizes in inches and replacement part numbers) by clicking on the text link above or the thumbnail image to the left.

License Plate Light Bulbs

If you need to change a burnt out license plate light bulb located in the tailgate door of your second generation (2009, 2010, 2011, 2012, 2013 & 2014) Nissan Murano SUV or you'd like to upgrade them both to brighter LED bulbs, check out my DIY tutorial for the procedure (including the replacement part numbers) by clicking on the text link above or the thumbnail image on the left.

Cargo Area Light Bulbs

The second generation Nissan Murano features two cargo area lights in the underside of the tailgate door.

If you need to change a burnt out bulb, check out my DIY tutorial (with the replacement part number) by clicking on the text link above or the thumbnail picture on the left.

Courtesy Step Light Bulb

If you need to change a burnt out courtesy step light bulb located at the bottom of the plastic interior door panel in your Nissan Murano, check out my DIY tutorial (with the part number) by clicking on the text link above or the thumbnail image over on the left.

Tail Light Bulbs Change

The tail light housings of a second generation (2009, 2010, 2011, 2012, 2013 & 2014) Nissan Murano contain the rear turn signal, side marker and reverse light bulbs.

The brake lights are LED bulbs that should last the life time of the vehicle.

Take a look at my DIY instructions (with the part numbers) by clicking on the text link above or the thumbnail picture on the left.

12V Car Battery Change

If you've been having a hard time starting the engine in your second generation Nissan Murano SUV and the OEM 12 volt car battery is a few years old, you probably need to replace it.

Check out my DIY tutorial for the procedure (including the replacement part numbers) by clicking on the text link above or the thumbnail image to the left.

Electrical Fuse Change

The best place to start when troubleshooting any electrical problem with your second generation (2009, 2010, 2011, 2012, 2013 & 2014) Nissan Murano SUV is to check for a blown fuse or relay in either the engine bay or interior passenger compartment electrical panels.

Take a look at my DIY guide for the procedure by clicking on the text link above or the thumbnail image to the left.

Engine Air Filter Change

The engine air filter element in a second generation Nissan Murano SUV with the VQ35DE 3.5 liter V6 motor should be cleaned at every oil change and replaced when dirty.

Check out my DIY instructions for the procedure, including the replacement part numbers, by clicking on the text link above or the thumbnail image to the left.

VQ35DE Oil Change

The best way to keep your 2nd generation (2009, 2010, 2011, 2012, 2013 & 2014) Nissan Murano SUV running reliably is to regularly change the motor oil and replace the oil filter on the VQ35DE 3.5 liter V6 engine.

Take a look at my DIY tutorial for the procedure (including the replacement oil filter part numbers) by clicking on the text link above or the thumbnail image to the left.

Front Brake Pads Change

If you've been hearing a squealing, screeching or grinding noise coming from the front end of your second generation (2009, 2010, 2011, 2012, 2013 & 2014) Nissan Murano SUV when you step on the brake pedal, you probably need to change the front disc brake pads.

Check out my DIY instructions for the procedure (including the replacement part numbers) by clicking on the text link above or the thumbnail picture on the left.

Rear Disc Brake Pads

The rear disc brake pads on a Nissan Murano tend to last about twice as long as the front pads or anywhere from 60,000 miles to over 100,000 miles depending on your unique driving conditions.

To view my DIY tutorial for the procedure, including the replacement part numbers, click on the text link above or the thumbnail image over on the left.

2015-2019 Nissan Murano DIY Repair & Maintenance Guides