Nissan Armada
Windshield Wiper Blades Replacement Guide
How to change the windshield window wiper
blades and replacement sizes for the 2004-2015 Nissan Armada SUV.
 2012 Armada Wipers |
 Raise Wiper Arm |
 Push Release Tab Away |
| This
automotive "how-to" guide was specifically written to assist owners
of the first generation (2004, 2005, 2006, 2007, 2008, 2009, 2010,
2011, 2012, 2013, 2014 & 2015) Nissan Armada in changing the
windshield window wiper blades. Owners of other Nissan or Infiniti vehicles such as the Versa, Cube, Sentra, Altima, LEAF, Maxima, 370Z, Juke, Rogue, Murano, Xterra, Pathfinder, Quest, Frontier, Titan, QX56, Q50, G37, EX37, QX60, FX37, FX50 and QX80 may also find these DIY instructions to be helpful. Replacement wiper blade sizes are as follows: Driver Side 24" (inches) and Passenger Side 22". These sizes should apply to all 1st generation 2004-2015 Armada models. A few compatible wiper blades with their part numbers are as follows: Bosch 24A & Bosch 22B, Michelin 8524 & Michelin 8522, Rain-X 5079280-1 & Rain-X 5079279-1, Anco 31-24 & Anco 31-22 and Trico 25-240 & Trico 25-220. No tools are needed to change the wiper blades. Have a towel handy to protect the glass windshield. |
||
|
|
||
 Slide Bracket Off Hook |
 Towel To Protect Glass |
 Line Up Mount & Hook |
| The first step is
to raise the wiper arm off the windshield until it is perpendicular with the
glass and stands up by itself. Then rotate the old wiper blade away from the metal wiper arm and locate the small black plastic release tab. Push the release tab away from the wiper blade and slide the mounting bracket out of the metal hook at the end of the metal arm. Place a towel on the windshield to protect it just in case the metal wiper arm slaps down on to the glass. I recommend buying the Bosch 24A and Bosch 22B wiper blades since they have excellent reviews on Amazon. Line up the plastic mounting bracket at the center of the new wiper blade with the metal hook at the end of the wiper arm. |
||
|
|
||
 Slide Bracket In To Hook |
 Turn New Blade Parallel |
 Lower Wiper Arm |
| Slide the bracket
in to the metal hook until it clicks securely in to place.
Turn the wiper blade parallel to the wiper arm. Pull on the wiper blade and make sure that it is securely attached. Remove the towel and gently lower the wiper arm down to the windshield. For the best wiper performance, thoroughly clean off the windshield and apply a window treatment product such as Rain-X. For more,
check out my other
Nissan
Armada Repair & Maintenance Guides. |
||
If you found this guide to be helpful,
please consider making a small donation by clicking on the PayPal.com
"Donate" button located to the right of this paragraph. Thank you!
 (Note: I am not a registered charity. Donations are not tax deductible.) |