Nissan Armada
Rear Wiper Blade Replacement Guide
How to change the rear windshield window
wiper blade on a 1st generation 2004-2015 Nissan Armada with photos.
Armada Rear Wiper |
Pull Off Cap At Base |
Base Cover Removed |
This
automotive "how-to" guide was specifically written to assist owners
of the 1st generation (2004, 2005, 2006, 2007, 2008, 2009, 2010,
2011, 2012, 2013 & 2015) Nissan Armada in changing the rear
windshield window wiper blade. Owners of other Nissan or Infiniti vehicles such as the Versa, Cube, Sentra, Altima, LEAF, Maxima, 370Z, Juke, Rogue, Murano, Xterra, Pathfinder, Quest, Frontier, Titan, QX56, Q50, G37, EX37, QX60, FX37, FX50 and QX80 may also find these DIY instructions to be helpful. The replacement wiper blade is 12" (inches) in size. A few compatible wiper blades with their part numbers are as follows: Trico 12-B, Anco AR-12B, Michelin 9512, Valeo R12D, Silblade RB112-B and Bosch H306. No tools are needed to change the rear windshield window wiper blade. |
||
|
||
Lift Tab Out of Slot |
Pull Wiper Arm Out |
Rotate Wiper Blade |
The first step is
to gently pull off the black plastic cover at the base of the wiper arm. Set
the cover aside in a safe place. Then lift the large tab out of the slot in the metal bracket where the center of the wiper arm rests when not in use. Rotate the wiper blade at an angle with the wiper arm. |
||
Pull Bar Out of Socket |
Pull Blade Off Arm |
Mount In Center of Blade |
|
||
Firmly push the old
wiper blade towards the vehicle to pop the mounting bar at the center out of
the socket in the arm. Turn the wiper blade perpendicular to the wiper arm and slide it out to separate them. I recommend buying the Trico 12-B rear wiper blade since it has excellent reviews on Amazon. |
||
Wiper Blade Removed |
Mounting Bar & Socket |
Push Bar In To Socket |
Line up the
mounting bar at the center of the new wiper blade with the slot at the end
of the wiper arm. Firmly pull the wiper blade towards yourself to pop the mounting bar in to the socket. |
||
Rotate Blade Parallel |
Insert Tab In To Slot |
Arm Resting In Bracket |
Rotate the new
wiper blade parallel to the wiper arm. Insert the tab at the center of the wiper arm in to the slot in the bracket attached to the cargo lift gate. |
||
Line Up Base Cover |
Snap Cover In To Place |
Rear Wiper Blade Replaced |
Line up the black
plastic cap over the base of the wiper arm and gently snap it back in to
place. For the best wiper performance, I recommend thoroughly cleaning off the windshield and applying a glass treatment product such as Rain-X. For more,
check out my other
Nissan
Armada Repair & Maintenance Guides. |
If you found this guide to be helpful,
please consider making a small donation by clicking on the PayPal.com
"Donate" button located to the right of this paragraph. Thank you!
(Note: I am not a registered charity. Donations are not tax deductible.) |
Copyright 2024 © PaulsTravelPictures.com
All Rights Reserved ®
Paul's Travel Pictures is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com. |
Privacy Policy About Paul & Author Contact Info