Paul's Travel Pictures

Kia Soul 12V Automotive Battery Replacement Guide
How to change a dead 12 volt car battery in the engine bay of a 1st generation 2009 to 2013 Kia Soul with pictures.

Main Menu            Home           Digital Cameras

Misc. Pictures            Articles            My Blog


By
Paul B. Michaels
Author & Photographer
Auto Mechanic Since 1989

 
Kia-Soul-12V-Automotive-Battery-Replacement-Guide-001
2013 Kia Soul 12V Battery
Kia-Soul-12V-Automotive-Battery-Replacement-Guide-002
Loosen 10mm Nut
Kia-Soul-12V-Automotive-Battery-Replacement-Guide-003
Lift Off Negative Terminal
This automotive maintenance tutorial was specifically written to assist owners of the 1st generation (2009, 2010, 2011, 2012 & 2013) Kia Soul in changing the 12 volt automotive battery in the engine bay.

Owners of other Kia and Hyundai vehicles such as the Forte, Cadenza, Rio, Optima, Sedona, Sorento, Sportage, Sonata, Accent, Elantra, Veloster, Azera, Tucson, Santa Fe and Genesis may also find these DIY instructions to be helpful.

A few compatible aftermarket Group Size 121 batteries with their part numbers include the following: EverStart MAXX-121R (Walmart), AutoCraft Gold 121R-1, Powerstride # 6121RMF and Odyssey PC1200MJT.

The tools needed to replace the battery include a 10mm socket or wrench, a 12mm socket, and a 1/4" or 3/8" drive ratchet.

I would also recommend wearing gloves and safety eyeglasses.



 
Kia-Soul-12V-Automotive-Battery-Replacement-Guide-004
Cover Terminal With Rag
Kia-Soul-12V-Automotive-Battery-Replacement-Guide-005
"+" Positive Terminal
Kia-Soul-12V-Automotive-Battery-Replacement-Guide-006
Lift Off Terminal Cover
The first step is to loosen the nut on the "-" negative terminal on the right (driver side) of the battery by turning it counter clockwise with the 10mm socket and ratcheting wrench.

Pull the negative terminal straight off the battery post, wrap it in a small towel and tuck it away on the side.

Covering the terminal with a rag or glove will help prevent accidental contact with the battery posts.

Then squeeze together the two release tabs on the "+" positive battery terminal cover and swing it open to the left.

Kia-Soul-12V-Automotive-Battery-Replacement-Guide-007
Loosen Counter Clockwise
Kia-Soul-12V-Automotive-Battery-Replacement-Guide-008
Pull Off Positive Terminal
Kia-Soul-12V-Automotive-Battery-Replacement-Guide-009
Cover Positive Terminal
Loosen the nut on the positive terminal by turning it counter clockwise with the 10mm socket and ratcheting wrench.

Pull the positive terminal straight off the battery post, wrap it in a rag and tuck it away on the side.

Kia-Soul-12V-Automotive-Battery-Replacement-Guide-010
Pull Off Battery Cover
Kia-Soul-12V-Automotive-Battery-Replacement-Guide-011
Two 12mm Bolts
Kia-Soul-12V-Automotive-Battery-Replacement-Guide-012
Loosen Counter Clockwise
Lift the battery cover (A.K.A. "shield" or "box") straight up off the old 12V battery.

The old battery is held in place to the plastic battery tray by a metal clamp attached with two 12mm bolts.

Loosen the two bolts by turning them counter clockwise with a 12mm socket and ratcheting wrench.



 

Kia-Soul-12V-Automotive-Battery-Replacement-Guide-013
Battery Clamp Bolts
Kia-Soul-12V-Automotive-Battery-Replacement-Guide-014
Two 12mm Bolts Removed
Kia-Soul-12V-Automotive-Battery-Replacement-Guide-015
Pull Back Hold Down Clamp
You may not have to entirely remove the two bolts from the hold down clamp in order to lift out the old battery.

I had some trouble getting the two bolts back in later on, so it might be easier to loosen them just enough to release the battery.

Kia-Soul-12V-Automotive-Battery-Replacement-Guide-016
Clamp Moved Off Battery
Kia-Soul-12V-Automotive-Battery-Replacement-Guide-017
Lift Out Old 12V Battery
Kia-Soul-12V-Automotive-Battery-Replacement-Guide-018
Rocket # GB60AL
Once the two hold down bracket bolts have been loosened or removed, you can carefully lift the old battery out of the engine bay.

Be sure to either bring your old battery with you to the store to avoid having to pay a "core" or "disposal" fee when you purchase the new battery. The auto parts store or Walmart will have the old battery properly recycled.

The OEM battery in this 2013 Kia Soul was a Rocket brand part number GB60AL (CMF60L-BCI) with 550 CCA (cold cranking amps).

Kia-Soul-12V-Automotive-Battery-Replacement-Guide-019
12V 550CCA 440A
Kia-Soul-12V-Automotive-Battery-Replacement-Guide-020
Battery Tray
Kia-Soul-12V-Automotive-Battery-Replacement-Guide-021
Lower In New Battery
Check that the plastic battery tray is clean of any large debris that might cause the new battery to not rest flat.

Carefully lower the new battery down on to the tray with the "+" positive side on the left and the "-" negative side on the right (driver side).

Lower the protective cover down over the new battery. (I forgot this step and had to replace it later.)

Kia-Soul-12V-Automotive-Battery-Replacement-Guide-022
Replace 12mm Bolts
Kia-Soul-12V-Automotive-Battery-Replacement-Guide-023
Replace Positive Terminal
Kia-Soul-12V-Automotive-Battery-Replacement-Guide-024
Tighten 10mm Clockwise
Secure the rear bottom edge of the new battery with the metal hold down clamp.

Spin in the two bolts by hand a few turns to prevent them from becoming cross threaded.

Tighten the bolts by turning them clockwise with the 12mm socket and ratcheting wrench.

If you've had a problem with corrosion build up on the battery posts, consider using some felt anti-corrosion washers.

Push the "+" terminal over the positive battery terminal on the left side of the new battery.

Tighten the terminal by turning the nut clockwise with the 10mm socket and ratcheting wrench.

Kia-Soul-12V-Automotive-Battery-Replacement-Guide-025
Replace "-" Terminal
Kia-Soul-12V-Automotive-Battery-Replacement-Guide-026
Tighten 10mm Nut
Kia-Soul-12V-Automotive-Battery-Replacement-Guide-027
12V Battery Replaced
Push the "-" terminal over the negative battery post and tighten the 10mm nut in the clockwise direction.

Test the new battery by starting the engine. If the car won't start, try removing the terminals, clean the battery posts and terminals with a wire brush before re-attaching them.

For more, check out my other Kia Soul DIY Maintenance Guides.
 

If you found this guide to be helpful, please consider making a small donation by clicking on the PayPal.com "Donate" button located to the right of this paragraph. Thank you!
(Note: I am not a registered charity. Donations are not tax deductible.)

Main Menu       Home       Digital Cameras

Misc. Pictures       Articles       My Blog

 

Copyright 2024 © PaulsTravelPictures.com
 All Rights Reserved ®

Paul's Travel Pictures is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com.

Privacy Policy     About Paul & Author Contact Info