Jeep Renegade
License Plate Light Bulbs Replacement Guide
How to change a burnt out license plate
light bulb in the tailgate of a 1st generation 2015-2018 Jeep Renegade.
2016 Jeep Renegade License Plate |
License Plate Light Housing |
Gently Pry Out Housing |
This
automotive maintenance tutorial was specifically written to assist
owners of the first generation (2015, 2016, 2017, 2018 and possibly
also the 2019 and 2020 model years) Jeep Renegade SUV in changing a
burnt out license plate light bulb in the tailgate or upgrade them
both to brighter LED units. Owners of other Chrysler, Dodge, Jeep, RAM or Fiat vehicles such as the 200, 300, Pacifica, Town & Country, Avenger, Charger, Challenger, Journey, Dart, Durango, Magnum, Grand Caravan, Fiat 500 500X or 500L, Fiat 124 Spider, Grand Cherokee, Wrangler, Compass, Liberty, Patriot, ProMaster, 1500 and C/V Tradesman minivan may also find these DIY instructions to be helpful. A compatible replacement miniature wedge base light bulb is part number 2825 (also known as the # W5W). You can also choose to install some brighter 2825 LED bulbs. The only tool needed to access and replace the light bulbs is a small flathead screwdriver or a plastic pry bar tool. |
||
|
||
Retaining Clip - Left Side |
Light Housings Removed |
1/4 Turn Counterclockwise |
To prevent from
scratching the painted or plastic surfaces, I recommend either covering the
tip of your screwdriver with a thin micro fiber cloth or use a plastic
pry bar tool. Insert the blade of the tool in between the left side of the light housing (on either the driver or passenger side) and the tailgate door. Gently pry out the left side of the light housing to release the retaining clip. Carefully pull the light housing out of the tailgate. Rotate the black plastic bulb socket 1/4 turn counterclockwise before removing it from the housing. |
||
Bulb Socket Removed |
Pull Out Old Light Bulb |
Old Light Bulb Removed |
If the old light
bulb was recently turned on, be careful when you remove it. It might still
be hot enough to burn your fingers. Pull the old light bulb straight out of the socket. |
||
|
||
Push In New Light Bulb |
1/4 Turn Clockwise - Lock |
Re-Insert Right Side First |
Push a new number
2825 miniature wedge base light bulb straight in to the socket. You can also choose to install some brighter 2825 LED bulbs. (The 2825 bulbs are also known as part number "W5W".) Re-insert the bulb socket in to the housing and rotate it 1/4 turn clockwise to secure it in place. Then re-insert the wires and the right (passenger) side of the housing back in to the opening on the underside of the tailgate. |
||
Gently Snap In Retaining Clip |
Testing New Light Bulbs |
New Light Bulbs Installed |
Gently pop the
retaining clip on the left (driver) side of the housing back into place. To test the new license plate light bulbs, turn on the headlights or press the "Unlock" button on the key fob to activate the exterior lights. For more,
please check out all of my
Jeep Renegade DIY Repair
& Maintenance Guides. |
If you found this guide to be helpful,
please consider making a small donation by clicking on the PayPal.com
"Donate" button located to the right of this paragraph. Thank you!
(Note: I am not a registered charity. Donations are not tax deductible.) |
Copyright 2024 © PaulsTravelPictures.com
All Rights Reserved ®
Paul's Travel Pictures is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com. |
Privacy Policy About Paul & Author Contact Info