Paul's Travel Pictures

Honda CR-V Interior Door Panel Removal Guide
How to take off the interior door panels of a 3rd generation 2007-2011 Honda CR-V to upgrade the OEM speakers.

Main Menu            Home           Digital Cameras

Misc. Pictures            Articles            My Blog


By
Paul B. Michaels
Author & Photographer
Auto Mechanic Since 1989

 
Honda-CR-V-Interior-Door-Panel-Removal-Guide-001
2011 CR-V Door Panel
Honda-CR-V-Interior-Door-Panel-Removal-Guide-002
Door Opener Handle
Honda-CR-V-Interior-Door-Panel-Removal-Guide-003
Pry Out Trim Plastic Piece
This automotive maintenance tutorial was specifically written to assist owners of the third generation (2007, 2008, 2009, 2010 & 2011) Honda CR-V in removing the plastic interior door panels in order to upgrade the OEM speakers, add soundproofing material, fix a faulty electrical switch or replace the power window motor.

Owners of other Honda or Acura vehicles such as the Pilot, Insight, CR-Z, Accord, Civic, Fit, Crosstour, Odyssey, Ridgeline, TSX, ILX, TLX, TL, RLX, RDX and MDX may also find these DIY instructions to be helpful.

The tools needed to take off the door panel include a small flathead screwdriver, a Phillips head screwdriver and an automotive panel removal tool or a large flathead screwdriver.

The OEM door speaker is held in place by one Phillips head screw.



 
Honda-CR-V-Interior-Door-Panel-Removal-Guide-004
Trim Panel Removed
Honda-CR-V-Interior-Door-Panel-Removal-Guide-005
Armrest Well Trim Piece
Honda-CR-V-Interior-Door-Panel-Removal-Guide-006
Screw Cover Removed
The first step is to carefully pry out the plastic trim piece behind the door opener handle with the small flathead screwdriver.

There is a small release tab at the top of the trim panel that you'll need to push down with the screwdriver before prying it out.

Then pry out the rectangular plastic screw cover at the bottom of the door pull well in the center of the arm rest.

Set the two trim pieces aside in a safe place.

Honda-CR-V-Interior-Door-Panel-Removal-Guide-007
Pry Open Screw Cover
Honda-CR-V-Interior-Door-Panel-Removal-Guide-008
Lower Cover Opened
Honda-CR-V-Interior-Door-Panel-Removal-Guide-009
Pry Open Upper Cover
Move to the bottom of the door pull handle and pry open the rectangular screw cover with the small flathead screwdriver.

It is hinged on the outer edge and should remain attached to the door panel.

Move to the top of the door pull handle and pry open the upper screw cover with the small flathead screwdriver.

Honda-CR-V-Interior-Door-Panel-Removal-Guide-010
Upper Cover Opened
Honda-CR-V-Interior-Door-Panel-Removal-Guide-011
Pry Off Sail Panel
Honda-CR-V-Interior-Door-Panel-Removal-Guide-012
Sail Panel Removed
Move to the top of the door panel and gently pry off the triangular sail panel with the small flathead screwdriver.

It is held in place by two friction fasteners.

Set the sail panel aside in a safe place.

Honda-CR-V-Interior-Door-Panel-Removal-Guide-013
Remove Phillips Screws
Honda-CR-V-Interior-Door-Panel-Removal-Guide-014
Door Handle Screws
Honda-CR-V-Interior-Door-Panel-Removal-Guide-015
Remove Armrest Screw
Remove the two screws behind the door opener handle by turning them counterclockwise with the Phillips head screwdriver.

Remove the single screw in the door pull well at the center of the armrest by turning it counterclockwise with the Phillips head screwdriver.

Set the three screws aside with the two plastic trim pieces.

Honda-CR-V-Interior-Door-Panel-Removal-Guide-016
Remove Upper Screw
Honda-CR-V-Interior-Door-Panel-Removal-Guide-017
Big Door Pull Handle Screw
Honda-CR-V-Interior-Door-Panel-Removal-Guide-018
Remove Lower Screw
Remove the upper and lower screws in the door pull handle by turning them counterclockwise with the Phillips head screwdriver.

Make a mental note of how the larger screw is at the top of the handle and the lower screw goes in the bottom of the handle.

Honda-CR-V-Interior-Door-Panel-Removal-Guide-019
Smaller Phillips Screw
Honda-CR-V-Interior-Door-Panel-Removal-Guide-020
5 Screws & 3 Panels
Honda-CR-V-Interior-Door-Panel-Removal-Guide-021
Pull Out Pop Rivets
Set the two door pull handle screws aside with the other parts.

You should now have removed 5 Phillips head screws and 3 plastic panels.

Insert a plastic automotive panel pry bar tool or a large flathead screwdriver in between the bottom edge of the door panel and the metal door frame.

Firmly pull out the bottom of the door panel to disengage the plastic pop rivet friction fasteners.

Honda-CR-V-Interior-Door-Panel-Removal-Guide-022
Friction Fasteners Removed
Honda-CR-V-Interior-Door-Panel-Removal-Guide-023
Lift Panel Off Door Frame
Honda-CR-V-Interior-Door-Panel-Removal-Guide-024
Door Handle & Lock Cables
Continue gently pulling out the pop rivets all along the bottom edge and both sides of the door panel.

Lift the plastic panel off the metal door frame.

Tilt the top of the door panel towards yourself and support the bottom with your thighs.

There are two different methods for disconnecting the door opener handle and door lock switch cables.

Honda-CR-V-Interior-Door-Panel-Removal-Guide-025
Gently Pull Off Bracket
Honda-CR-V-Interior-Door-Panel-Removal-Guide-026
Assembly Disconnected
Honda-CR-V-Interior-Door-Panel-Removal-Guide-027
3 Friction Fastener Clips
The first and possibly easier method is to pull off the entire door opener handle and door lock switch assembly from the rear of the door panel.

The assembly is held in place to the rear of the door panel by three metal clips on the panel that act as friction fasteners inside slots on the handle/lock assembly.

If you have trouble pulling off the door opener handle / lock switch assembly, try gently wiggling it while pulling or carefully pry with a small flathead screwdriver.

If it still won't pop off, continue with the second method below.

Honda-CR-V-Interior-Door-Panel-Removal-Guide-028
Alternative Method
Honda-CR-V-Interior-Door-Panel-Removal-Guide-029
Pry Open "C" Collars
Honda-CR-V-Interior-Door-Panel-Removal-Guide-030
Pull Out Plastic Ends
If you already disconnected the door opener handle and door lock switch assembly, skip down to the electrical connector removal pictures down below.

To release the cables from the rear of the assembly, first pry open the white and black plastic "C" collars from the plastic end pieces.

Pull the plastic pieces near the ends of the cables out of the metal bracket.

Honda-CR-V-Interior-Door-Panel-Removal-Guide-031
Open Plastic Clamp
Honda-CR-V-Interior-Door-Panel-Removal-Guide-032 Honda-CR-V-Interior-Door-Panel-Removal-Guide-033
Remove Metal Bar
Then pry open the white plastic clamp and pull out the ridged metal bar at the end of the door lock switch cable.



 

Honda-CR-V-Interior-Door-Panel-Removal-Guide-034
Door Opener Handle Cable
Honda-CR-V-Interior-Door-Panel-Removal-Guide-035
Open Plastic "C" Collar
Honda-CR-V-Interior-Door-Panel-Removal-Guide-036
Lift Out Metal Bar
Pry open the blue plastic "C" collar at the end of the door opener handle cable and lift the metal bar out of its socket.
Honda-CR-V-Interior-Door-Panel-Removal-Guide-037
Switch Panel Power Plug
Honda-CR-V-Interior-Door-Panel-Removal-Guide-038
Release Button On Plug
Honda-CR-V-Interior-Door-Panel-Removal-Guide-039
Plastic Door Panel Removed
Press the release button on the white plastic electrical connector for the switch panel and pull it straight out of its socket.

Set the plastic door panel aside in a safe place.

Honda-CR-V-Interior-Door-Panel-Removal-Guide-040
Metal Door Frame
Honda-CR-V-Interior-Door-Panel-Removal-Guide-041
Remove Phillips Screw
Honda-CR-V-Interior-Door-Panel-Removal-Guide-042
Pry Off OEM Speaker
The OEM door speaker is held in place by a single Phillips head screw.

Remove the screw by turning it counterclockwise with the Phillips head screwdriver.

Then loosen the slightly adhesive foam on the rear of the speaker with an automotive pry tool or a small flathead screwdriver.

Honda-CR-V-Interior-Door-Panel-Removal-Guide-043
OEM Speaker Removed
Honda-CR-V-Interior-Door-Panel-Removal-Guide-044
Squeeze Release Tabs
Honda-CR-V-Interior-Door-Panel-Removal-Guide-045
Unplug Electrical Connector
Pull the OEM speaker out of the door panel and pinch together the two release tabs on the power plug before sliding it straight out of its socket.

The front and rear doors of a 3rd generation Honda CR-V can accommodate aftermarket speakers in the following sizes: 5 1/4" (5.25"), 6 1/2" (6.5") and 6 3/4" (6.75").

I'd recommend buying new speakers from Crutchfield since they usually include any necessary wiring harnesses, electrical connector adaptors and/or mounting brackets.

If you'd like to reduce road noise and allow your new speakers to sound their best, apply Dynamat Sound Deadener to the metal door frame. It will help stop the vibrations and rattles when you crank up the volume.

Honda-CR-V-Interior-Door-Panel-Removal-Guide-046
Hold Panel Near Frame
Honda-CR-V-Interior-Door-Panel-Removal-Guide-047
Switch Panel Electrical Socket
Honda-CR-V-Interior-Door-Panel-Removal-Guide-048
Push In Power Plug
To replace the plastic door panel, hold it near the door frame and tilt the top towards yourself while supporting the bottom with your legs.

Push the white plastic electrical connector straight in to the socket.

Below are the two methods for re-connecting the door opener handle and door lock switch cables.

Honda-CR-V-Interior-Door-Panel-Removal-Guide-049
Re-Insert Metal Bar
Honda-CR-V-Interior-Door-Panel-Removal-Guide-050
Snap On "C" Collar
Honda-CR-V-Interior-Door-Panel-Removal-Guide-051
Push Plastic Piece In Bracket
Re-insert the "L" shaped metal bar at the end of the door opener handle cable in to the socket and snap the blue plastic "C" collar back in place.
Honda-CR-V-Interior-Door-Panel-Removal-Guide-052
Push On Plastic Collar
Honda-CR-V-Interior-Door-Panel-Removal-Guide-053
Re-Insert Straight Metal Bar
Honda-CR-V-Interior-Door-Panel-Removal-Guide-054
Close Plastic Clamp
Push the plastic piece near the end of the cable back in to the metal bracket and snap the black plastic collar over it.

Re-insert the ridged metal bar at the end of the door lock switch cable in to the white plastic clamp and close it.

Honda-CR-V-Interior-Door-Panel-Removal-Guide-055
Snap Closed With Pliers
Honda-CR-V-Interior-Door-Panel-Removal-Guide-056
Insert Plastic End In Bracket
Honda-CR-V-Interior-Door-Panel-Removal-Guide-057
Push On Plastic "C" Collar
Push the clamp closed with your fingers or use a pair of needle nose pliers to snap it shut.

Re-insert the plastic piece near the end of the cable in to the metal bracket and push the plastic "C" collar over it.

If you removed the entire door opener handle / lock switch assembly, follow the steps below to re-attach it to the door panel.

Honda-CR-V-Interior-Door-Panel-Removal-Guide-058
Or Alternative Method
Honda-CR-V-Interior-Door-Panel-Removal-Guide-059
Line Up Friction Fasteners
Honda-CR-V-Interior-Door-Panel-Removal-Guide-060
Push Assembly Back In Place
Line up the metal clips on the rear of the door panel with the slots in the door opener handle / lock switch assembly and gently push it back in place.
Honda-CR-V-Interior-Door-Panel-Removal-Guide-061
Hang Door Panel On Frame
Honda-CR-V-Interior-Door-Panel-Removal-Guide-062
Line Up Pop Rivet Fasteners
Honda-CR-V-Interior-Door-Panel-Removal-Guide-063
Tap In Friction Fasteners
Lower the plastic door panel on to the lip at the top of the metal door frame.

Line up the white plastic pop rivet friction fasteners on the back of the panel with their corresponding holes in the metal door frame.

Firmly tap in the pop rivets all along the bottom and both sides of the door panel.

Honda-CR-V-Interior-Door-Panel-Removal-Guide-064
Replace Smaller Lower Screw
Honda-CR-V-Interior-Door-Panel-Removal-Guide-065
Tighten Clockwise Direction
Honda-CR-V-Interior-Door-Panel-Removal-Guide-066
Upper Door Pull Handle Screw
Replace the smaller screw at the bottom of the door pull handle by turning it clockwise with the Phillips head screwdriver.

Insert the larger Phillips head screw in to the top of the door pull handle and tighten it in the clockwise direction.

Honda-CR-V-Interior-Door-Panel-Removal-Guide-067
Tighten Upper Phillips Screw
Honda-CR-V-Interior-Door-Panel-Removal-Guide-068
Close Screw Cover
Honda-CR-V-Interior-Door-Panel-Removal-Guide-069
Upper Screw Cover Closed
Push the upper door pull handle screw cover closed.
Honda-CR-V-Interior-Door-Panel-Removal-Guide-070
Close Lower Screw Cover
Honda-CR-V-Interior-Door-Panel-Removal-Guide-071
Lower Screw Cover Closed
Honda-CR-V-Interior-Door-Panel-Removal-Guide-072
Replace Arm Rest Screw
Push the lower door pull handle screw cover closed.

Replace the screw at the bottom of the armrest well by turning it clockwise with the Phillips head screwdriver.

Honda-CR-V-Interior-Door-Panel-Removal-Guide-073
Replace Two Handle Screws
Honda-CR-V-Interior-Door-Panel-Removal-Guide-074
Tighten Clockwise
Honda-CR-V-Interior-Door-Panel-Removal-Guide-075
Pop In Trim Piece
Tighten the two screws behind the door opener handle in the clockwise direction with the Phillips head screwdriver.

Push the plastic trim piece back in to place behind the door opener handle.

Honda-CR-V-Interior-Door-Panel-Removal-Guide-076
Re-Insert Screw Cover
Honda-CR-V-Interior-Door-Panel-Removal-Guide-077
Push On Sail Panel
Honda-CR-V-Interior-Door-Panel-Removal-Guide-078
Door Panel Re-Installed
Push the plastic screw cover back in to place at the bottom of the door pull well in the center of the armrest.

Line up the two friction fasteners on the rear of the sail panel and push it back in to place.

Sit inside the vehicle, close the door and check that the power window switch, door opener handle and door lock switch all still work properly.

For more, check out my other Honda CR-V Repair & Maintenance Guides.
 

If you found this guide to be helpful, please consider making a small donation by clicking on the PayPal.com "Donate" button located to the right of this paragraph. Thank you!
(Note: I am not a registered charity. Donations are not tax deductible.)

Main Menu       Home       Digital Cameras

Misc. Pictures       Articles       My Blog

 

Copyright 2024 © PaulsTravelPictures.com
 All Rights Reserved ®

Paul's Travel Pictures is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com.

Privacy Policy     About Paul & Author Contact Info