Paul's Travel Pictures

Ford EcoSport Rear Wiper Blade Replacement Guide
How to change the rear window wiper blade on a 2nd generation 2013 to 2021 Ford EcoSport compact SUV.

Main Menu            Home           Digital Cameras

Misc. Pictures            Articles            My Blog

2020 Ford EcoSport
Raise Wiper Arm
Use Pry Bar Tool
This automotive maintenance tutorial was specifically written to assist owners of the second generation 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020 and 2021 Ford EcoSport compact SUV in changing the rear wiper blade located on the back windshield window.

Owners of other Ford or Lincoln vehicles such as the Fiesta, B-Max, Escape, Edge, Bronco Sport, Explorer, Expedition, Transit, Focus, Mondeo, S-Max, Puma, Kuga, Endura, Everest, Ka, Figo, Endeavour, Aviator, Corsair, Nautilus and Navigator may also find these DIY instructions to be helpful.

The OEM (original equipment manufacturer) wiper blade size in inches is 11" and the part number is Motorcraft WW1108 (also known as WW-1108).

A few compatible replacement rear wiper blades with their part numbers include the following: Bosch A281H (3397008045), Trico 11-G and Anco AR11G.

No tools are required to remove and replace the blade although a plastic pry bar tool can make the job easier.

The first step is to gently lift the rear wiper arm off the back windshield.

Insert the plastic pry bar tool in between the center of the wiper blade and the wiper arm.

Gently pry the middle of the old wiper blade away from the wiper arm and towards the window.

You should feel or hear the mounting bar in the center of the wiper arm pop out of the socket on the old wiper blade.


Pop Blade Off Arm
Underside of Wiper Arm
Close Up - Mounting Bar
Try to avoid using excessive force.

The old blade should pop off the wiper arm relatively easily.

Old Blade Detached
OEM Blade 11" Inches
New Wiper Blade
The OEM (original equipment manufacturer) 11" rear wiper blade is part number Motorcraft WW1108.

I recommend buying the Bosch A281H wiper blade.

Line Up Socket & Bar
New Blade Socket
Push Socket Into Blade
Line up the new wiper blade with the wiper arm.

Make sure the "C" shaped socket on the new wiper blade is lined up with the mounting bar on the underside of the wiper arm cover.

Firmly push the new wiper blade into place to secure the socket to the mounting bar.

New Blade Attached
Lower Arm To Glass
New Blade Installed
Make sure the new wiper blade is securely attached to the wiper arm.

Gently lower the wiper arm back down to the window.

For the best wiper performance, thoroughly clean off the back window and apply a glass treatment product such as Rain-X to help repel water.

Be sure to write down the rear wiper blade change in your SUV's service records.

For more, check out all of the 2013-2021 Ford EcoSport DIY Repair & Maintenance Guides.

If you found this guide to be helpful, please consider making a small donation by clicking on the "Donate" button located to the right of this paragraph. Thank you!
(Note: I am not a registered charity. Donations are not tax deductible.)


Main Menu       Home       Digital Cameras

Misc. Pictures       Articles       My Blog


Copyright 2021
 All Rights Reserved

Paul's Travel Pictures is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to

Privacy Policy     About Paul & Author Contact Info