Paul's Travel Pictures

Chrysler Town & Country Fog Light Bulbs Replacement Guide
How to change a burnt out fog light bulb in the front bumper of a 5th generation 2011-2014 Chrysler Town & Country.

Main Menu            Home           Digital Cameras

Misc. Pictures            Articles            My Blog


By
Paul B. Michaels
Author & Photographer
Auto Mechanic Since 1989

 
Chrysler-Town-and-Country-Fog-Light-Bulbs-Replacement-Guide-001
2012 Town & Country Fog Light
Chrysler-Town-and-Country-Fog-Light-Bulbs-Replacement-Guide-002
Look Behind Bumper - Bulb
Chrysler-Town-and-Country-Fog-Light-Bulbs-Replacement-Guide-003
Pry Off Electrical Connector
This automotive tutorial was specifically written to assist owners of the revised 5th generation (2011, 2012, 2013, 2014, 2015 & 2016) Chrysler Town & Country in changing a burnt out fog light bulb in the front bumper.

Owners of related Chrysler Group minivan vehicles such as the Dodge Grand Caravan, Chrysler Grand Voyager, Lancia Grand Voyager, Ram C/V Tradesman Cargo Van and the Volkswagen Routan may also find these DIY instructions to be helpful.

A replacement fog light bulb is part number H11 from manufacturers such as Sylvania, GE, Philips, PIAA, Eiko and Nokya.

If you would like to have brighter fog lights, install some compatible H11 LED bulbs.

No tools are required to replace the fog light bulbs.

A small flathead screwdriver may be useful for prying up the retaining clip on the electrical connector.



 
Chrysler-Town-and-Country-Fog-Light-Bulbs-Replacement-Guide-004
Power Plug Removed
Chrysler-Town-and-Country-Fog-Light-Bulbs-Replacement-Guide-005
Base of Fog Light Bulb
Chrysler-Town-and-Country-Fog-Light-Bulbs-Replacement-Guide-006
1/4 Turn Counter Clockwise
The first step is to slide under the front bumper of the minivan on the side with the burnt out fog light bulb.

Gently pry off the two retaining clips on the sides of the electrical connector with your fingers or a small flathead screwdriver.

Slide the power plug straight off the base of the old bulb.

Chrysler-Town-and-Country-Fog-Light-Bulbs-Replacement-Guide-007
Remove Old Bulb
Chrysler-Town-and-Country-Fog-Light-Bulbs-Replacement-Guide-008
Philips H11 LL 12V 55W
Chrysler-Town-and-Country-Fog-Light-Bulbs-Replacement-Guide-009
Insert New H11 Bulb
Rotate the the base of the bulb 1/4 turn counter clockwise and pull it straight out of the housing.

Try to avoid touching the glass part of the new H11 halogen bulb with your fingers or anything greasy in the engine bay.

If you get the bulb dirty, wipe it clean with an alcohol moistened paper towel.

Chrysler-Town-and-Country-Fog-Light-Bulbs-Replacement-Guide-010
1/4 Turn Clockwise
Chrysler-Town-and-Country-Fog-Light-Bulbs-Replacement-Guide-011
Push On Power Plug
Chrysler-Town-and-Country-Fog-Light-Bulbs-Replacement-Guide-012
Test New Fog Light Bulb
Insert the new bulb in to the housing and rotate it 1/4 turn clockwise to lock it in place.

Test the new bulbs by turning on the headlights and switching on the fog lights.

For more, check out my other Chrysler Town & Country Repair & Maintenance Guides.
 

If you found this guide to be helpful, please consider making a small donation by clicking on the PayPal.com "Donate" button located to the right of this paragraph. Thank you!
(Note: I am not a registered charity. Donations are not tax deductible.)

Main Menu       Home       Digital Cameras

Misc. Pictures       Articles       My Blog

 

Copyright 2024 © PaulsTravelPictures.com
 All Rights Reserved ®

Paul's Travel Pictures is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com.

Privacy Policy     About Paul & Author Contact Info