Toyota
Corolla Shift Lock Release Guide
How to release the automatic
transmission's shift lock release mechanism in a 2020 Toyota Corolla.
2020 Gear Selector |
Small Access Cover |
Gently Pry Out Cover |
This automotive maintenance
tutorial was specifically written to assist owners of the twelfth generation
2019 (hatchback), 2020, 2021, 2022 (and probably also the 2023, 2024 & 2025)
Toyota Corolla sedan in using the automatic transmission's shift lock
release mechanism to manually change the gear selector from "P" (Park) to
"N" (Neutral). This may be necessary to move or tow the vehicle if the 12V
battery is weak or dead or for some other mechanical or electrical issue. Owners of other Toyota and Lexus vehicles such as the Camry, C-HR, Venza, Avalon, 86, Sienna, Tacoma, RAV4, Highlander, 4Runner, Sequoia, IS 350, RX 350, UX 200, GS 350, IS 300 and ES 350 may also find these DIY instructions to be helpful. The only tool needed to remove the access cover and use the shift lock release mechanism is a small flat head screwdriver such as from a precision screwdriver set. Please remember to engage the emergency / parking brake and place wheel chocks on both sides of the tires to help prevent the vehicle from moving unexpectedly. Please proceed with caution and at your own risk! Sit in the driver's seat. Push down and hold the brake pedal. Locate the small rectangular shaped plastic access cover situated on the right (passenger) side of the gear selector opposite of the "P" symbol. Insert a small flat head screwdriver into the slot on the access cover and very gently pry it out. Try to avoid using excessive force to prevent from cracking the cover or the gear selector trim panel. |
||
|
||
Access Cover Removed |
Set Aside Button Cover |
White Plastic Button |
Set the access cap
aside in a safe place. Look into the opening and locate the white plastic shift lock release button. |
||
Screwdriver Push Button |
"P" (Park) To "N" Neutral |
Manually Move Car |
Make sure that your
foot is firmly pushing down the brake pedal to prevent the vehicle from
moving unexpectedly. Insert the flat head screwdriver into the opening and push down on the shift lock release button. While holding down the shift lock release button, move the gear selector from "Park" back to "Neutral". Have your assistants manually move the vehicle into the desired position. |
||
Shift Back To Park |
Pop In Plastic Cover |
Plastic Cap Secured |
Once you are done
moving the vehicle, shift the gear selector from "Neutral" to "Park". Gently pop in the small plastic access cap back into place. Please check out all of my
2020 Toyota Corolla DIY Repair & Maintenance Guides. |
If you found this guide to be helpful,
please consider making a small donation by clicking on the PayPal.com
"Donate" button located to the right of this paragraph. Thank you!
(Note: I am not a registered charity. Donations are not tax deductible.) |
Copyright 2024 © PaulsTravelPictures.com
All Rights Reserved ®
Paul's Travel Pictures is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com. |