Paul's Travel Pictures

Chevrolet Cruze Windshield Wiper Blades Replacement Guide
How to change the front windshield window wiper blades on a second generation 2016 to 2019 GM Chevy Cruze.

Main Menu            Home           Digital Cameras

Misc. Pictures            Articles            My Blog

2018 Cruze Windshield
Raise Wiper Arm
Driver Side Wiper Arm
This automotive maintenance tutorial was specifically written to assist owners of the second generation 2016, 2017, 2018 and 2019 GM Chevrolet Cruze in changing the front windshield window wiper blades.

Owners of other General Motors vehicles from Chevrolet, Buick, GMC, Cadillac and Holden such as the Sonic, Spark, Malibu, Impala, Volt, Bolt, Camaro, Corvette, Trax, Equinox, Blazer, Suburban, Tahoe, Traverse, Colorado, Silverado, Express, TrailBlazer, Encore, Regal TourX, Envision, Enclave, LaCrosse, Cascada, Sierra, Canyon, Acadia, Terrain, Yukon, Savana, XT4, XT5, XT6, Escalade, CT5, CTS-V, XTS, CT6, ATS, Astra and Commodore may also find these DIY instructions to be helpful.

The OEM wiper blade sizes in inches are as follows: Driver Side 28" and Passenger Side 24".

A few compatible replacement wiper blades with their part numbers include the following: Bosch 28CA & Bosch 24CA, Trico 19-280 & Trico 19-240, PIAA 97070 & PIAA 97060, Michelin 14528 & Michelin 14524 and Anco C-28-OE & Anco C-24-OE.

The only tool needed to remove and replace the wiper blades is a plastic pry bar tool or a flat head screwdriver.

The first step is to lift the wiper arm off the windshield until it remains in the raised position by itself.


Wiper Arm - Blade Mount
Push In Release Button
Slide Blade Out of Bracket
Place a towel on the windshield to protect the window from being scratched, chipped, shattered or cracked just in case the wiper arm smacks down on to the glass while you are replacing the wiper blade.

Locate the square release button on the black plastic wiper arm mounting bracket.

Firmly push in the release button with the plastic pry bar tool.

Slide the old wiper blade straight out of the bracket on the end of the wiper arm.

Towel - Protect Glass
Line Up New Wiper Blade
Mounting Bracket
I recommend buying the Bosch 28CA and Bosch 24CA wiper blades since they have excellent reviews on Amazon.

Line up the plastic mount on the new wiper blade with the metal bracket at the end of the wiper arm.

Slide Mount Into Bracket
Snap Blade Into Bracket
Lower Blade To Window
Slide the mount straight into the bracket.

You should hear or feel the mount "click" securely into the bracket.

Gently lower the wiper blade and arm back down towards the windshield.

For the best wiper performance, I recommend thoroughly cleaning off the window and applying a glass treatment product that will repel water such as Rain-X.

Be sure to write down the wiper blade change in your car's service records.

For more, please check out all of my 2016-2019 GM Chevrolet Cruze DIY Repair & Maintenance Guides.

If you found this guide to be helpful, please consider making a small donation by clicking on the "Donate" button located to the right of this paragraph. Thank you!
(Note: I am not a registered charity. Donations are not tax deductible.)

Main Menu       Home       Digital Cameras

Misc. Pictures       Articles       My Blog


Copyright 2024
 All Rights Reserved

Paul's Travel Pictures is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to

Privacy Policy     About Paul & Author Contact Info