Paul's Travel Pictures

Nissan Rogue Dome Light Bulb Replacement Guide
How to change a burnt out overhead dome light bulb in a 1st generation 2008 to 2013 Nissan Rogue with pictures.

Main Menu                 Home                Digital Cameras                Misc. Pictures                 Articles                 My Blog

Nissan-Rogue-Dome-Light-Bulb-Replacement-Guide-001
2011 Rogue Dome Light
Nissan-Rogue-Dome-Light-Bulb-Replacement-Guide-002
Pry Out Lens Cover
Nissan-Rogue-Dome-Light-Bulb-Replacement-Guide-003
Easier To Pry On Left

This automotive "how-to" guide was specifically written to assist owners of the 1st generation (2008, 2009, 2010, 2011, 2012, & 2013) Nissan Rogue in changing a burnt out overhead map light bulb or upgrading them both to brighter LED units.

Owners of other Nissan or Infiniti vehicles such as the Versa, Cube, Sentra, Altima, LEAF, Maxima, Juke, Murano, Xterra, Pathfinder, Armada, Quest, Frontier, Titan, 370Z, G37, M37, EX37, FX37, JX35, and QX56 may also find these DIY instructions to be helpful.

A replacement dome light bulb is part # DE3175 from manufacturers such as Sylvania, GE, Eiko, Putco, and PIAA.

The only tool needed to change the bulb is a small flathead screwdriver used to pry out the translucent plastic lens cover.

Nissan-Rogue-Dome-Light-Bulb-Replacement-Guide-004
Dome Bulb Exposed
Nissan-Rogue-Dome-Light-Bulb-Replacement-Guide-005
Press Metal Release Tab
Nissan-Rogue-Dome-Light-Bulb-Replacement-Guide-006
Old Bulb Removed
Insert the blade of the flathead screwdriver in between the edge of the lens cover and the light housing. I was able to pry out the lens cover by prying at the right (passenger side) edge.

After removing the cover, it looked like it would have been easier to pry it off at the left (driver side) edge near the On/Off/Door switch.

Set the lens cover aside in a safe place.

Press the metal release tab on the left (driver side) of the dome bulb socket and pull out the old bulb.



 

Nissan-Rogue-Dome-Light-Bulb-Replacement-Guide-007
Bulb Socket
Nissan-Rogue-Dome-Light-Bulb-Replacement-Guide-008
Insert New DE3175 Bulb
Nissan-Rogue-Dome-Light-Bulb-Replacement-Guide-009
Flip Switch To "On"
Insert the right (passenger) side of the new DE3175 bulb in first and then pop in the left side.

Slide the switch over to the "On" position to test the new bulb.

Nissan-Rogue-Dome-Light-Bulb-Replacement-Guide-010
Pop Lens Cover In Place
Nissan-Rogue-Dome-Light-Bulb-Replacement-Guide-011
Lens Replaced
Nissan-Rogue-Dome-Light-Bulb-Replacement-Guide-012
Testing New Light Bulb
Line up the dome light lens cover and gently snap it back in to place.

Slide the switch to the "Door" position so that the light will turn on whenever a passenger door is opened.

For more, check out my other Nissan Rogue Repair & Maintenance Guides.
 

If you found this guide to be helpful, please consider making a small donation by clicking on the PayPal.com "Donate" button located to the right of this paragraph. Thank you!
(Note: I am not a registered charity. Donations are not tax deductible.)

Main Menu            Home            My Digital Cameras            Misc. Pictures            Articles            My Blog

 

Google

Copyright 2013 PaulsTravelPictures.com
 All Rights Reserved