Paul's Travel Pictures

Nissan Juke Rear Window Wiper Blade Replacement Guide
How to change the rear window wiper blade on a first generation 2010 to 2016 Nissan Juke with picture illustrated steps.

Main Menu                 Home                Digital Cameras                Misc. Pictures                 Articles                 My Blog


Nissan-Juke-Rear-Window-Wiper-Blade-Replacement-Guide-001
2014 Juke Rear Wiper
Nissan-Juke-Rear-Window-Wiper-Blade-Replacement-Guide-002
Pull Off Plastic Base Cap
Nissan-Juke-Rear-Window-Wiper-Blade-Replacement-Guide-003
Lift Wiper Arm Off Window

This automotive maintenance tutorial was specifically written to assist owners of the first generation (2010, 2011, 2012, 2013, 2014 and possibly also the updated 2015 & 2016) Nissan Juke in changing the rear windshield window wiper blade.

Owners of other Nissan SUV, hatchback or minivan vehicles such as the Versa, Cube, Leaf, Pathfinder, Rogue, Xterra, Murano, Armada and Quest may also find these DIY instructions to be helpful.

The rear window wiper blade is 12" (inches) in size. A few compatible replacement blades with their part numbers are as follows: Valeo R12A, Anco AR-12E, Trico 12J and Silblade RB112-B.

No tools are needed to change the rear wiper blade. For optimum wiper performance, I'd recommend applying a window treatment product such as Rain-X or Zaino Glass Polish.

Nissan-Juke-Rear-Window-Wiper-Blade-Replacement-Guide-004
Rotate Blade Away From Arm
Nissan-Juke-Rear-Window-Wiper-Blade-Replacement-Guide-005
Pop Blade Off Wiper Arm
Nissan-Juke-Rear-Window-Wiper-Blade-Replacement-Guide-006
"C" Shaped Socket
The first step is to gently pull the plastic cover off the base of the wiper arm.

Set the cover aside in a safe place.

Raise the wiper arm off the window.

Rotate the old wiper blade away from the arm at a slight angle.

Continue rotating the blade away from the arm until the mounting bar in the center of the blade pops out of the "C" shaped socket at the end of the wiper arm.

I recommend buying the Valeo R12A rear wiper blade since it has excellent reviews on Amazon.

Nissan-Juke-Rear-Window-Wiper-Blade-Replacement-Guide-007
Mounting Bar - Center of Blade
Nissan-Juke-Rear-Window-Wiper-Blade-Replacement-Guide-008
Pop Bar In To Socket
Nissan-Juke-Rear-Window-Wiper-Blade-Replacement-Guide-009
Rotate Blade Parallel To Arm



 

Line up the mounting bar in the center of the new wiper blade with the "C" shaped socket at the end of the wiper arm.

Hold the new wiper blade at about a 30-40 degree angle to the wiper arm and push the mounting bar in to the socket.

Rotate the new wiper blade towards the wiper arm and firmly pop in the mounting bar.

Nissan-Juke-Rear-Window-Wiper-Blade-Replacement-Guide-010
Lower Blade To Window
Nissan-Juke-Rear-Window-Wiper-Blade-Replacement-Guide-011
Push Plastic Cover On Base
Nissan-Juke-Rear-Window-Wiper-Blade-Replacement-Guide-012
Rear Wiper Blade Replaced
Gently lower the wiper arm back down on the window.

For the best wiper performance, thoroughly clean off the rear windshield window and apply a glass treatment product such as Rain-X.

For more, check out my other Nissan Juke DIY Repair Guides.
 

If you found this guide to be helpful, please consider making a small donation by clicking on the PayPal.com "Donate" button located to the right of this paragraph. Thank you!
(Note: I am not a registered charity. Donations are not tax deductible.)

Please help support this website by shopping at Amazon.com. Thank You! 

Main Menu            Home            My Digital Cameras            Misc. Pictures            Articles            My Blog

 

Google

Copyright 2016 © PaulsTravelPictures.com
 All Rights Reserved