Nissan Cube
Dome Light Bulb Replacement Guide
How to replace the dome light bulb in a
2009, 2010, 2011 or 2012 Nissan Cube MPV with picture illustrated instructions.
![]() Nissan Cube Dome Light |
![]() Pry Out Lens Cover |
![]() Light Cover Removed |
||
|
||||
![]() |
![]() Release Old # DE3175 Bulb |
![]() |
||
| Once the clear plastic dome light cover has been removed, release the old light bulb by pushing on the metal contact spring or pop it out with a small screwdriver. | ||||
![]() Dome Light Bulb Socket |
![]() Push In New # DE3175 Bulb |
![]() Push Button - Test Bulb |
||
| Push in a new # DE 3175 light bulb until it snaps into place. Double check that it is secure before sliding the light switch to test the new bulb. | ||||
![]() Replace Bulb Cover |
![]() Snap Lens Into Place |
![]() Test Dome Light |
||
| Line up the clear
plastic lens cover over the dome light housing and gently snap it back into
place. Slide the light switch again to test that the new bulb still works. For more, please visit my
Nissan Cube Maintenance & Repair Guides page. |
||||
| If you found this guide to be helpful,
please consider making a small donation by clicking on the PayPal.com
"Donate" button located to the right of this paragraph. Thank you!
(Note: I am not a registered charity. Donations are not tax deductible.) |
Copyright 2011 © PaulsTravelPictures.com
All Rights Reserved ®