Hyundai Santa
Fe Rear Wiper Blade Replacement Guide
How to replace the rear windshield wiper
blade on a 2nd generation 2007-2012 Hyundai Santa Fe SUV with pictures.
 |
 |
 |
| This
automotive "how-to" guide was specifically written to assist owners
of the 2nd generation 2007, 2008, 2009, 2010, 2011 & 2012 Hyundai Santa Fe SUV in replacing
the rear window wiper blade. Owners of other similar Hyundai or Kia vehicles such as the Tucson, Veracruz, Sorento, Sportage and Sedona may also find this guide to be helpful. The OEM wiper blade size in inches is 14". A few replacement rear window wiper blades for the 07-12 Santa Fe with their part numbers are as follows: Bosch H352, Trico 14-A, Michelin 9514, Rain-X 850007 R14A and Anco AR-14A. No tools are needed to replace the rear wiper blade. |
||
|
|
||
 |
 |
 |
| Move to the back of the Santa Fe and
swing the metal arm of the wiper blade away from the rear
windshield. Swivel the wiper blade until it faces away from the
vehicle. With the rubber part of the wiper blade facing away from the rear of the vehicle, gently pop the blade off the metal arm. |
||
 |
 |
 |
| I recommend buying
either the Trico 14-A or the
Bosch H352 14 inch size wiper
blades since they both have excellent reviews on Amazon. Position the new wiper blade so that the small column or cylinder inside the blade lines up with the socket on the metal arm and snap them together. |
||
 |
 |
 |
| Check that the new
wiper blade is securely on the metal arm and lower the blade down to the
rear window. For more,
visit my
Hyundai Santa Fe SUV
Repair & Maintenance Guides page. |
||
If you found this guide to be helpful,
please consider making a small donation by clicking on the PayPal.com
"Donate" button located to the right of this paragraph. Thank you!
 (Note: I am not a registered charity. Donations are not tax deductible.) |