Paul's Travel Pictures

Hyundai Santa Fe Cargo Area Light Bulb Replacement Guide
How to replace the rear cargo area's overhead light bulb in a 2007 to 2012 Hyundai Santa Fe SUV with pictures.

Main Menu                 Home                Digital Cameras                Misc. Pictures                 Articles                 My Blog

Hyundai-Santa-Fe-Cargo-Area-Light-Bulb-Replacement-Guide-001 Hyundai-Santa-Fe-Cargo-Area-Light-Bulb-Replacement-Guide-002 Hyundai-Santa-Fe-Cargo-Area-Light-Bulb-Replacement-Guide-003

This automotive "how-to" guide was specifically written to assist owners of the 2nd generation 2007, 2008, 2009, 2010, 2011 & 2012 Hyundai Santa Fe SUV in replacing the rear cargo area overhead light bulb.

Owners of other similar Hyundai or Kia vehicles such as the Tucson, Veracruz,  Sorento, Sportage and Sedona may also find this guide to be helpful.

A new light bulb for the cargo / trunk area of a Hyundai Santa Fe is part # DE3175 from Sylvania, Phillips, GE, Eiko and other manufacturers. You can also use a brighter LED bulb.

The only tool needed to replace the bulb is a small flathead screwdriver. Open the rear liftgate of the Santa Fe and climb into the cargo area. Use the small flathead screwdriver to gently pry out the clear plastic lens cover.

Hyundai-Santa-Fe-Cargo-Area-Light-Bulb-Replacement-Guide-004 Hyundai-Santa-Fe-Cargo-Area-Light-Bulb-Replacement-Guide-005 Hyundai-Santa-Fe-Cargo-Area-Light-Bulb-Replacement-Guide-006
To prevent any damage to the cargo area light housing or the clear plastic lens cover, cover the blade of the screwdriver with a thin cloth before inserting it into the notch near the on/off switch.

Pull out the old DE 3175 light bulb with your thumb and forefinger or pop it out with the flathead screwdriver.


Hyundai-Santa-Fe-Cargo-Area-Light-Bulb-Replacement-Guide-007 Hyundai-Santa-Fe-Cargo-Area-Light-Bulb-Replacement-Guide-008 Hyundai-Santa-Fe-Cargo-Area-Light-Bulb-Replacement-Guide-009
Push in a new # DE3175 bulb into the cargo area light socket and test it by moving the switch to the "On" position.

If you are installing an LED bulb and it doesn't work at first, try flipping it around in the socket.

Hyundai-Santa-Fe-Cargo-Area-Light-Bulb-Replacement-Guide-010 Hyundai-Santa-Fe-Cargo-Area-Light-Bulb-Replacement-Guide-011 Hyundai-Santa-Fe-Cargo-Area-Light-Bulb-Replacement-Guide-012
Line up the clear plastic lens cover over the housing and gently snap it into place. Move the light switch to the "Door" setting so that it will automatically turn on when the rear tailgate door is opened.

For more, visit my Hyundai Santa Fe SUV Repair & Maintenance Guides page.

If you found this guide to be helpful, please consider making a small donation by clicking on the "Donate" button located to the right of this paragraph. Thank you!
(Note: I am not a registered charity. Donations are not tax deductible.)

Please help support this website by shopping at Thank You! 

Main Menu            Home            My Digital Cameras            Misc. Pictures            Articles            My Blog



Copyright 2016 ©
 All Rights Reserved