Paul's Travel Pictures

Ford Fusion Key Fob Battery Replacement Guide
How to replace the coin cell battery in the key fob remote control of a 2006-2012 Ford Fusion sedan with pictures.

Main Menu                 Home                Digital Cameras                Misc. Pictures                 Articles                 My Blog

Ford-Fusion-Key-Fob-Battery-Replacement-Guide-001
2010 Ford Fusion Key Fob
Ford-Fusion-Key-Fob-Battery-Replacement-Guide-002
Notch Near Panic Button
Ford-Fusion-Key-Fob-Battery-Replacement-Guide-003
Pry Open With Screwdriver

This automotive "how-to" guide was specifically written to assist owners of the 2006 to 2012 Ford Fusion in replacing the coin cell battery in the keyless entry system's remote control.

Owners of other Ford, Lincoln or Mercury vehicles such as the Fiesta, Mustang, Focus, Taurus, Flex, Edge, Expedition, Escape, Ranger, F-150, MKZ, MKS, MKX, MKT, Navigator, Milan, Grand Marquis, Mariner, and Mountaineer may also find this instruction guide to be helpful.

A replacement coin cell (AKA "button" or "watch") battery for the Ford Fusion key fob is part # CR2032 from various manufacturers such as Energizer, Panasonic, Duracell, Maxell, Sanyo and Philips.

The only tool needed to replace the key fob battery is a small flathead screwdriver. You could also use a coin or small knife.

Ford-Fusion-Key-Fob-Battery-Replacement-Guide-004
Key Fob Rear Cover Off
Ford-Fusion-Key-Fob-Battery-Replacement-Guide-005
Pry Out Old Battery
Ford-Fusion-Key-Fob-Battery-Replacement-Guide-006
Panasonic CR 2032 3V
The first step is to locate the small notch on the key fob at the edge closest to the red "Panic" button. Insert the blade of a small flathead screwdriver into the notch and pry off the rear cover.

Below the key fob's rear cover, you'll see the old Panasonic CR2032 3V battery. Gently pry out the old battery with the small flathead screwdriver

Ford-Fusion-Key-Fob-Battery-Replacement-Guide-007
Dielectric Grease
Ford-Fusion-Key-Fob-Battery-Replacement-Guide-008
Insert New CR2032 Battery
Ford-Fusion-Key-Fob-Battery-Replacement-Guide-009
"+" Side Facing Up


 
Push in a new CR 2032 3V battery into the key fob remote control with the "+" side facing up towards you.
Ford-Fusion-Key-Fob-Battery-Replacement-Guide-010
Line Up Back Cover
Ford-Fusion-Key-Fob-Battery-Replacement-Guide-011
Snap Rear Cover In Place
Ford-Fusion-Key-Fob-Battery-Replacement-Guide-012
Test New Key Fob Battery
Line up the key fob's rear cover and carefully snap it into place.

Test the new battery by pressing the "Unlock" or "Lock" buttons while standing near your Ford Fusion sedan.

For more, please check out my Ford Fusion Repair & Maintenance Guides page.
 

If you found this guide to be helpful, please consider making a small donation by clicking on the PayPal.com "Donate" button located to the right of this paragraph. Thank you!
(Note: I am not a registered charity. Donations are not tax deductible.)

Main Menu            Home            My Digital Cameras            Misc. Pictures            Articles            My Blog

 

Google

Copyright 2012 PaulsTravelPictures.com
 All Rights Reserved