Paul's Travel Pictures

Chrysler Town & Country Rear Wiper Blade Replacement Guide
How to change the rear windshield window wiper blade on a 5th generation 2011 to 2014 Chrysler Town & Country.

Main Menu                 Home                Digital Cameras                Misc. Pictures                 Articles                 My Blog

Chrysler-Town-and-Country-Rear-Window-Wiper-Blade-Replacement-Guide-001
2012 Town & Country
Chrysler-Town-and-Country-Rear-Window-Wiper-Blade-Replacement-Guide-002
Lift Blade Off Window
Chrysler-Town-and-Country-Rear-Window-Wiper-Blade-Replacement-Guide-003
Push Release Button

This automotive tutorial was specifically written to assist owners of the revised 5th generation (2011, 2012, 2013 & 2014) Chrysler Town & Country in changing a worn out rear windshield window wiper blade.

Owners of related Chrysler Group minivan vehicles such as the Dodge Grand Caravan, Chrysler Grand Voyager, Lancia Grand Voyager, Ram C/V Tradesman Cargo Van and the Volkswagen Routan may also find these DIY instructions to be helpful.

A replacement rear wiper blade is 16" (inches) in size.

Some of the compatible aftermarket blades with their part numbers are as follows: Bosch 16-CA, Anco 31-16, Bosch 4816, Valeo 600-16, Trico 20-160, Michelin 5016, Motorcraft WW-1601-PF and PIAA 95040.

No tools are needed to change the rear wiper blade.

Chrysler-Town-and-Country-Rear-Window-Wiper-Blade-Replacement-Guide-004
Slide Bracket Off Hook
Chrysler-Town-and-Country-Rear-Window-Wiper-Blade-Replacement-Guide-005
Remove Blade From Arm
Chrysler-Town-and-Country-Rear-Window-Wiper-Blade-Replacement-Guide-006
Protect Window With Towel
Raise the rear wiper arm off the window.

Angle the wiper blade away from the wiper arm and locate the black plastic release tab.

Press the release tab towards the wiper arm and slide the blade to the left (driver side) and off the metal hook at the end of the arm.

Place a towel against the window to protect the glass from being cracked or chipped just in case the wiper arm smacks down against it.

Chrysler-Town-and-Country-Rear-Window-Wiper-Blade-Replacement-Guide-007
Line Up Bracket & Hook
Chrysler-Town-and-Country-Rear-Window-Wiper-Blade-Replacement-Guide-008
Slide Blade On Arm
Chrysler-Town-and-Country-Rear-Window-Wiper-Blade-Replacement-Guide-009
Lower Blade To Window
Line up the plastic bracket in the center of a new 16 inch wiper blade with the metal hook at the end of the wiper arm.

Slide the bracket to the right and insert it in to the hook. Double check that the new wiper blade is securely in place.

Gently lower the wiper blade down to the rear window.

For more, check out my other Chrysler Town & Country Repair & Maintenance Guides.
 

If you found this guide to be helpful, please consider making a small donation by clicking on the PayPal.com "Donate" button located to the right of this paragraph. Thank you!
(Note: I am not a registered charity. Donations are not tax deductible.)

Main Menu            Home            My Digital Cameras            Misc. Pictures            Articles            My Blog

 

Google

Copyright 2013 PaulsTravelPictures.com
 All Rights Reserved