Challenger Key Fob Battery

After a few years of daily use, the battery inside the smart or "intelligent" key fob for the keyless "enter 'n go" system of your third generation (2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015 and possibly also the 2016 model year) Dodge Challenger can become weak or stop working entirely.

Check out my DIY instructions for the procedure (including the replacement part number) by clicking on the text link above or the thumbnail image to the left.

Challenger Map Light Bulbs

If you need to change a burnt out map light bulb in the overhead console of your third generation Dodge Challenger, check out my DIY tutorial for the procedure (with the replacement part numbers) by clicking on the text link above or the thumbnail image on the left.

Challenger Vanity Lights

If you'd like to replace a burnt out vanity mirror light bulb located in the sun visor of your third generation Dodge Challenger (2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015 and possibly also the 2016 model year) take a look at my DIY instructions for the procedure (with the replacement part numbers) by clicking on the text link above or the thumbnail image to the left.

Challenger Cabin Air Filter

If the A/C system in your third generation Dodge Challenger hasn't been working as well recently or the air coming out of the vents smells musty, you probably need to clean or change the cabin air filter element in the HVAC blower motor housing.

To view my DIY instructions for the procedure (including the replacement part numbers) click on the text link above or the thumbnail image to the left.

Courtesy Step Light Bulb

The third generation Dodge Challenger is equipped with courtesy step lights at the bottom of the plastic interior door panels.

Check out my DIY tutorial for changing a burnt out step light bulb or upgrading them both to brighter LED bulbs by clicking on the text link above or the thumbnail image to the left.

Interior Door Panel

If you'd like to upgrade the OEM door speakers in your third generation (2008, 2009, 2010, 2011, 2012, 2013, 2014 & 2015) Dodge Challenger, you'll first have to take off the plastic interior door panels.

Take a look at my DIY instructions for the procedure by clicking on the text link above or the thumbnail image to the left.

Front Side Marker Bulb

This 2015 Challenger was equipped with LED side marker light bulbs, but the process for changing a burnt out incandescent side marker bulb in earlier model years is almost the same.

To view my DIY tutorial for the procedure, click on the text link above or the thumbnail image to the left.

Windshield Wiper Blades

If you've been having trouble seeing out of the front windshield window of your third generation Dodge Challenger during a rain or snow storm, you probably need to replace the wiper blades.

Check out my DIY instructions for the procedure (including the wiper blade sizes in inches and replacement part numbers) by clicking on the text link above or the thumbnail picture over on the left.

Trunk Light Bulb

If you need to change a burnt out cargo area light bulb in the trunk of your 3rd generation Dodge Challenger, check out my DIY tutorial for the procedure by clicking on the text link above or the thumbnail image to the left.

Tail Light Bulbs

The tail light assemblies of a third generation Dodge Challenger contain the brake, rear turn signal and reverse light bulbs.

This 2015 Challenger has LED lights that will last the life time of the vehicle, but click on the link or picture to view the DIY tutorial for accessing the bulb sockets on earlier model years.

12V Car Battery Change

If you've been having difficulty starting the engine in your third generation (2008, 2009, 2010, 2011, 2012, 2013, 2014 and 2015) Dodge challenger, especially on a cold morning, and the OEM 12 volt battery is a few years old, you probably need to replace it.

Check out my DIY tutorial for the procedure (including the replacement part numbers) by clicking on the text link above or the thumbnail image to the left.

Headlight Bulbs Change

The 2008 to 2014 Dodge Challenger models are equipped with both a combination low and high beam halogen headlight bulb and incandescent front turn signal light bulb.

Check out my DIY tutorial for changing the headlight bulbs by clicking on the text link above or the thumbnail image to the left.

Engine Air Filter Change

The engine air filter element in a 3rd generation Dodge Challenger with the 3.5L V6, 3.6L V6, 5.7L V8, 6.1L V8 or 6.4L V8 engines should be cleaned at every oil change and replaced when dirty.

Take a look at my DIY instructions for the procedure, including compatible replacement part numbers, by clicking on the text link above or the thumbnail image to the left.

Electrical Fuses Change

The best place to start when troubleshooting any electrical problem with your third generation Dodge Challenger is to check for a blown fuse or relay in either the engine bay or the trunk electrical panel locations.

To view my DIY instructions for the procedure, click on the text link above or the thumbnail image to the left.

3.6L V6 Engine Oil Change

The best way to keep your third generation Dodge Challenger running reliably for many years is to regularly change the motor oil and replace the oil filter.

Check out my DIY oil change tutorial for the 2011, 2012, 2013, 2014, 2015 & probably also the 2016 model year Challenger models equipped with the Pentastar 3.6 liter V6 engine by clicking on the text link above or the thumbnail image to the left.

Serpentine Belt Change

If you've been hearing a squeaking or squealing sound coming from the engine bay of your 2011, 2012, 2013, 2014, 2015 or 2016 Dodge Challenger equipped with the Pentastar 3.6L V6 engine, you probably need to change the serpentine accessory belt.

Take a look at my DIY instructions for the procedure by clicking on the text link above or the thumbnail image to the left.

Front Brake Pads

If you've been hearing a grinding or screeching sound coming from the front end of your third generation (2008, 2009, 2010, 2011, 2012, 2013, 2014 & 2015) Dodge Challenger when you step on the brake pedal, you probably need to change the front disc brake pads.

To view my DIY tutorial for the procedure (with the replacement part numbers) click on the text link above or the thumbnail image to the left.

Rear Disc Brake Pads

The rear disc brake pads on a third generation Challenger usually last twice as long as the front pads or anywhere from 60,000 to over 100,000 miles depending on your unique driving conditions.

Check out my DIY instructions for the procedure (including the replacement part numbers) by clicking on the text link above or the thumbnail image to the left.